A fiber laser cutting machine uses a focused beam to cut metal sheet, tube, or both, and the right class depends on power, working area, and whether you need a fully enclosed structure or an exchange platform. This guide compares the PH, P, and G Series so you can match a machine to your production line.
What a Fiber Laser Cutting Machine Actually Does
A fiber laser generator produces a beam that travels through an optical cable to a cutting head. The head focuses that beam onto the metal surface, melting or vaporizing material along a programmed path while an assist gas — usually oxygen, nitrogen, or compressed air — blows the molten material out of the kerf. That’s the whole mechanism. Everything else — bed size, enclosure type, exchange platforms — is about how that core process gets adapted to a specific shop floor.
Most buyers researching this category are trying to solve one of two problems: they’re replacing an older CO2 or plasma cutting line, or they’re scaling up sheet metal capacity and need to decide what class of machine actually fits their parts.
منصة تبادل ألياف الليزر آلة قطع
Three Machine Classes, Three Different Jobs
Fiber laser sheet cutters in this category generally fall into three structural groups.
سلسلة PH — High-speed fiber laser cutting machines built around single-platform structures. Current models are the PH3015, PH6020, and PH6025. These are positioned for continuous industrial production runs where cycle time on standard sheet sizes matters more than exotic part geometry.
سلسلة P — Enclosed exchange platform machines: P4020, P6025, P8025, P10025, and P12025. The fully enclosed structure contains beam and spatter, and the exchange platform lets an operator load the next sheet while the current one finishes cutting, cutting idle time between jobs.
سلسلة G — Large format machines for oversized plate: G9020, G12030, G15530, plus custom configurations. These are built for heavy fabrication work — structural steel, shipbuilding components, anything too large for a standard 4×8-style bed.
How to Narrow It Down
Measure your largest sheet size in regular production and pick a bed with margin, not an exact fit — running a sheet at the edge of a machine’s working envelope creates handling problems.
Check whether your facility or local workplace safety rules require an enclosed cutting area. If so, the P Series is the starting point regardless of throughput needs.
If your bottleneck is cycle time on sheets you already run at volume, prioritize the PH Series before looking at higher-power alternatives.
If parts regularly exceed standard sheet dimensions, move to the G Series or request a custom configuration rather than trying to nest oversized parts on a smaller bed.
Confirm gas supply, power capacity, and floor space at your facility before finalizing a model — these site factors affect which configuration within a series is actually installable.
| Series |
Models |
Structure |
Typical Fit |
| PH |
PH3015, PH6020, PH6025 |
Single platform, high-speed |
Continuous sheet production runs |
| P |
P4020, P6025, P8025, P10025, P12025 |
Fully enclosed, exchange platform |
Enclosed environments, reduced loading and unloading downtime |
| G |
G9020, G12030, G15530, Custom |
Large format, open or custom enclosure |
Oversized plate processing and heavy industrial fabrication |
Exact wattage and speed figures vary by the specific configuration ordered and aren’t published as a fixed per-model chart — power output, working dimensions, and automation options are selected during quoting based on the material and thickness you’re cutting.
The G Series and Where a 6KW Configuration Fits
The G Series is the large-format line, with G9020, G12030, and G15530 as the published catalog models, alongside custom working dimensions for buyers with non-standard sheet sizes. Higher-power configurations, including 6KW setups, are built within this series for customers cutting thicker structural plate — shipbuilding-adjacent fabrication is a common application.
One thing worth flagging directly: not every wattage-and-bed-size combination within the G Series appears as a standalone catalog listing. If you’re evaluating a specific configuration, confirm the exact bed dimensions and power output with HWlEiC directly rather than assuming it matches the closest published model.
تنسيق كبير آلة القطع بالليزر
A Mistake Buyers Make Often
More kilowatts doesn’t automatically mean faster cutting. Cutting speed on a given material and thickness depends on the interaction between laser power, cutting head optics, assist gas type and pressure, and nozzle condition — not power alone. A shop running mostly 3mm mild steel doesn’t necessarily benefit from jumping to the highest-power G Series configuration; that money is often better spent on a PH Series machine with a faster exchange cycle.
The second common assumption: that open-platform machines are inherently less safe than enclosed ones. Enclosure is primarily about containing beam and spatter in a shared workspace, not a universal safety upgrade — plenty of single-platform shops run PH Series equipment safely with standard laser safety protocols and adequate floor layout. The decision usually comes down to what your facility’s workplace rules require, not which structure is objectively “safer.”
Certifications and Compliance
HWlEiC Laser equipment is manufactured under anISO 9001:2015 quality management system certification, and the company publicly displays CE compliance for the European market and RoHS compliance restricting hazardous substances</cite>. ISO 9001:2015 itself is the internationally recognized quality management standard maintained by the International Organization for Standardization, and it’s what buyers should ask about if a vendor claims quality certification without specifics. Certificate numbers and issuing body details for HWlEiC’s certifications aren’t published on the company’s site, so don’t expect a document number without contacting the vendor directly.
What Actually Drives the Price
HWlEiC Laser doesn’t publish fixed prices for any series. That’s standard for this equipment category — industrial laser cutting machines aren’t sold off a price list because the final cost depends on laser power, working area, machine configuration, automation level, and the specific material application you’re cutting for. If a page in this category gives you a number without asking any of those questions first, treat it as a placeholder, not a quote. Getting an actual price means submitting your material type, thickness range, and target throughput for evaluation.
How This Fits Against Typical Buying Guides
Most published comparisons in this category lead with a wattage table and a material-thickness chart, then stop there. That’s useful for a first pass, but it skips the structural question that actually determines day-to-day operation: whether you’re loading sheets into an enclosed exchange platform or a single open bed, and how that changes cycle time between jobs. Wattage tells you what a machine can cut; platform structure tells you how fast you can keep feeding it.
What to Do Next
If you already know your sheet size range and material thickness, the series comparison above should narrow your options to two or three specific models. From there, the next step is submitting those specs for a configuration-specific quote, since neither power output nor final pricing is standardized across a series. If you’re still unsure whether your parts need sheet cutting, tube cutting, or both, that’s a separate product category worth checking before you commit to a sheet-only series.
أسئلة وأجوبة
Q: What’s the actual difference between the PH Series and P Series? A: Structure and workflow. PH Series machines are single-platform and built for cycle speed on standard sheets. P Series machines are fully enclosed with an exchange platform, which contains the beam and lets you load the next sheet while the current one finishes.
Q: Can a PH, P, or G Series machine also cut tube? A: No. These three series are sheet-only. Tube cutting is handled by a separate product line (T and TE Series), and combined sheet-and-tube cutting has its own dedicated line (ET, FT, and PT Series) if you need both capabilities on one machine.
Q: How long does installation take? A: This varies by machine size, site readiness, and configuration, and isn’t something to estimate generically — confirm a timeline during the quoting process based on your specific model and facility.
Q: Is an open-platform machine unsafe compared to an enclosed one? A: Not inherently. Enclosure mainly contains beam and spatter; safety in either configuration depends on following standard laser safety protocols and facility layout, not the presence of an enclosure alone.
Q: What certifications should I ask about? A: ISO 9001:2015 for quality management, plus CE and RoHS compliance if you’re importing into the EU or need to meet hazardous-substance restrictions. Ask for certificate numbers directly if you need them for procurement documentation.
Q: Does HWlEiC Laser list prices online? A: No. Pricing depends on power, bed size, configuration, and automation level, and requires a submitted quote request rather than a published price list.
16:18 
